In this jam packed video, Aviana goes to Flint Michigan to work on a newer TBM-910. We start with a thorough cleaning and paint correction prior to ceramic coating. (The ceramic coating helps immensely with keeping the PT6 soot off). After paint coating, the leather is cleaned and coated as well for stain resistance. Then we polish the brightwork (bare aluminum) and treat the pneumatic de-icing boots to a strip and seal with PBS Boot Prep and PBS Boot Sealant.
Request a quote at:
Say hi on Instagram at:
Some affiliate links to the products we use:
Gtechniq I2 Tri Clean leather cleaning solution https://amzn.to/2HKRLVl
Foaming Bottle https://amzn.to/2ZEV6jJ
Leather Scrubber https://amzn.to/2n3qSEB
Eagle Edgeless Microfiber Towels https://amzn.to/2PRjY35
Optimum No-Rinse https://amzn.to/2zYWdve
W5 Citrus Degreaser https://amzn.to/2ZOmpak
These videos are not made to teach you how to detail an aircraft, and often, I don’t show all of the steps involved in the process. I’d be happy to answer any questions, but cannot assume any liability for attempts at detailing. Aviana is not responsible for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk.